|
 
Flux Pumps and Renner Pumps
1. Flux Pumps
A. Industrial drum and container pumps -
for chemicals, acids, caustics, solvents, flammables,
and more.
Heavy duty
- repairable, non-throw-away
Proprietary
design features - double lip seal (3 materials), reversible drive shaft, top-pull
out, thick wear surfaces, no weep hole.
5 materials (PP, PVDF, SS, HC, Alum), 4 lengths in stock, capability
to 10', 41 mm & 50 mm
Full line of accessories: nozzles, chemically
resistant conductive hose, strainers, fume glands, compression glands,
port options, ground wires, FRL's, c-clamps for open vessels and more.
Special purpose models: liquid saver, pump N mixer, mechanical seal,
Junior Flux, high viscosity (also considered to be FDA Compliant) applications:
adhesive, resins, emulsions, inks, lubricants, silicones, and more.
Features: sealless, run dry, instantly primed, self draining, top entry,
safe, (no catastrophic failure mode), air or electric, pulsation-free,
no floor space, lightweight and portable, few parts, flow to 60 GPM,
heads to 100', more.
Markets: CP1, plating, paper, WWT, textile, steel, OEM, lubrication,
printing, packaging (adhesives), automotive, dialysis, printed circuit
board, semi-conductor, more.
B. Sanitary drum and container pumps
Two sizes (50 & 54 mm), lengths to 5', two styles (GS & S) up
to 100,000
CPS, stator housings with plate for baggie liner, horizontal models & vertical
externally mounted models, pressures to 120 PSI
Markets: Food, Dairy, Cosmetic, Health Care, Beverage, Pharmaceutical
C. Motors: ODP, TEFC, XP (some UL models), continuous-duty, brushless,
3 Ph, pneumatic, variable speed, 12 V, 24 V
D. Liquid Meters: ATEX, PP, 316 SS, ETFE - batch, totalize, pre-set
batch, in-line or mount to Flux tubeset, use with other type pumps, 26
GPM max, 2500 CPS, 1% accuracy, memory for 9 liquids, and more.
E. Junior Flux - pump and motor combination, lower price point, PP,
316 SS, PVDF, 3 lengths (39" max), 2-speed motor, up to 17 GPM
F. Other Flux Products: Centrifugal Immersion Pumps, Machined AODD pumps
in PTFE & PP (3/8" to 2")
2. Renner Pumps
25 + years / marketed by Sondermann / Flux owns Sondennann
A. Mag-Drive Range
Primary
materials: PP, PVDF, SS, ETFE
4 to 395
GPM
Heads to
197'
Neodymium
magnets
Heavy-duty
design
True union
connections: NPT, Flange, hose connection
Renner produces
their motors (through 5 HP), 1.25 SF, TEFC
Offers XP
+ special motor enclosures
Thrust bearings
for all conditions
Hydraulically
balanced shafts
Each unit
is individually tested and certified
ISO 9001
Every model
has a traceable serial #
Limited
run-dry after loss of fluid
Integral
self priming models available
Priming
tanks available for all models
Variable
Speed / Frequency Converters available
12 V, 24
V, 48 V DC units available - 1.3 GPM Max
B. Run-Dry Mag Drive Range
Patented
1-piece
ceramic drive shaft with 2 ceramic ball bearings
Maximum
5 degree F temperature rise after days of dry running
Thrust hearings
for all conditions
Materials:
PP, PVDF, SS (2008)
15 to 395
GPM
Heads to
197'
Maximum
temperatures: 176 F (PP), 230 F ( PVDF), 212 F (SS)
All else
the same as above mag-drive
C. Vertical Range
Primary
Materials: PP, PVDF, SS,
Other materials:
ETFE, Titanium, CPVC, PFA
Maximum
flow: 450 GPM
Maximum
head: 141'
Tallest
model: 98.4" (8' +) - has one intermediate bearing
19.7" model
is tallest without an intermediate bearing
Temperatures
to 212 F
Patented
labyrinth seal - protects motor bearings from fumes and crushes crystals that
can form when air and chemical mix.
RT-M is
a vertical mag-drive, hermetically sealed, for applications where bubbles can
normally form from a rotating drive shaft.
RT-A is
the "out of tank" version (dry pit)
RT-Z model
has the intermediate bearing
RT-MS is
multi-stage - typically 2 impellers
Filter available
for a number of models
Cartridges,
plate, bag, active carbon inserts available
Quick change
filter housing available
Special
designs available - ie: floating pendant
D. Markets: Printed circuit board, semi-conductor, plating, WWT, OEM,
CPI, textile, automotive, pharmaceutical, and more. |
